







Strut-Connector Platform
Height-adjustable Strut Connection for the Platform
✔ Flexible mounting, e.g. on the underside of the platform
✔ Simple 90° cut on the wooden beam
✔ Length of strut can be precisely adjusted thanks to turntable
✔ Also suitable for steel tubes instead of wooden beams
Easy assembly: Pre-drill the wooden beam in the centre with a Ø 24 mm drill bit, adjust the length and secure with 5 wood screws.
Tax included. Shipping calculated at checkout

Strut-Connector Platform
Sale price€131,00
Regular price (/)
Dimensions for strut
Wooden beams:
- Square timber length < 2 m (6,6 ft): 9 × 9 cm
- Square timber length < 3 m (9,8 ft): 12 × 12 cm
- Maximum strut length 3 m (9,8 ft)
Steel tube:
- Remove Hex Nut (Flex)
- Tube inner diameter: 25 - 28 mm
- Wall thickness depending on length and load 4 - 10 mm
- Maximum strut length 3 m (9,8 ft)
Assembly
- The strut must be firmly connected to the platform at the top with several long wood screws and, in case of high loads, additionally with a steel plate.
- The length of the strut to the tree can be measured roughly; it is better to leave it a little too long and shorten it later.
- Once a suitable spot on the tree has been found, pre-drill the GTS Safety with a diameter of 24 mm and screw it into the tree.
- Then pre-drill the Strut Connector, mount it, adjust it to the desired length with the turntable and screw it tight.
Detailed instructions are available here ...