GTS Top – Tree bolt up to 2,100 kg load
Small Tree Bolt for attaching cables and struts
✔ Small tree bolt with high load capacity
✔ Simple & tree-friendly installation
✔ M20 thread extendable (e.g. ring nut, etc.)
✔ Ideal for tree trunks with a diameter of 20 cm (7.9 in) or more
Secure bracket for the tree: for cables, sun sails, flying roofs, birdhouses, nesting boxes and much more.
Tax included. Shipping calculated at checkout
GTS Top 2.0 – Product Details
Product dimensions & details
Load Capacity – GTS Top 2.0
Guidelines for the load capacity of the GTS Top 2.0 when loaded in the centre of the shank (lever arm 11 cm):
- Vertical: 900 - 2100 kg
- Horizontal: 400 - 700 kg
- Pulling out: 400 - 800 kg
These values are guidelines – the exact load capacity depends heavily on the type of tree, lever arm and direction of load!
The GTS Top should mainly be loaded vertically; the load capacity is limited on the sides. The load capacity should never be used to its limits!
Further information can be found in the blog post ‘GTS Studies and Tests’.
Product innovations 2.0
- NEW – Tree Thread 2.0: The double-threaded thread was specially developed for living trees. The optimised thread shape maximises load transfer and facilitates installation.
- NEW – Quick Start Pin: The smoothed tenon allows direct insertion into the drill hole – for faster, effortless installation in the tree.
- Top Plate
Support plate for increased vertical loads – optimised according to the natural flow of force of a branch. Is wrapped around and firmly integrated by the growth of the tree.
- Shaft ø 40
With a diameter of 40 mm, the shaft supports all kinds of accessories and withstands the highest dynamic loads – maximum safety and a peaceful night's sleep guaranteed.
- Seamless
No weld seams on the shank, no weak points – our innovative steel alloy makes GTS Screws indestructible.
- Black KTL-Coating
No rust! The environmentally friendly dip coating provides important corrosion protection. The black surface ensures a discreet, natural appearance in the tree.
Assembly video & instructions
Detailed instructions can be found here ...
Assembly video:
Please note that the dimensions in the video may differ. The dimensions on the product page always apply!
Shipping & Delivery
- Ready for dispatch in 3 - 5 working days
- Delivery time depending on zone 1 - 14 working days
- Shipping costs according to weight (see shopping cart)
Further information here: Shipping service
Big dreams – small trees
For trees with thin trunks (Ø 30–35 cm), where the larger GTS Allstar would destroy too much tissue, there is now an ingenious solution: GTS Top.
It is as tree-friendly as the smaller GTS Friend, but thanks to its robust bearing plate, it has a significantly higher load capacity: in hardwood (e.g. beech), the screw can bear up to 2,100 kg vertically. In softwood (e.g. spruce), the load capacity is significantly lower at around 900 kg.
Please note: The GTS Top is primarily optimised for vertical loads and should not be subjected to heavy lateral loads, especially in softwood.
Height offset for thin trees
The drill hole for the GTS Top is 17 cm deep. To prevent two opposite screws from touching in the middle, the screws must be mounted with a height offset of 10 - 20 cm on thin trees (ø < 40 cm).
Limit lever arm
Especially in soft woods (spruce, fir, pine, poplar, etc.) and with high loads, it is important to keep the lever arm as short as possible. With Position-Rings, you can limit the play.
The right screw for every tree
Our GTS Treehouse Hardware is used not only by DIY enthusiasts, but also by numerous treehouse professionals worldwide. We know what matters!
Example with accessories
Here, the GTS Top had to be additionally reinforced from below: The load is high and the wood is rather soft (pine). To maximise the load capacity of the connection, the Beam Bracket is pushed very close to the tree (low lever arm).
