Drill-Kit GTS Allstar
Drill Bit Set for Pre-Drilling the GTS Allstar
✔ Must-have for mounting the GTS Allstar
✔ Auger Drill Bit Ø 36 mm – for the tree thread
✔ Forstner-Bit Ø 74 mm – for pre-drilling the cylinder
Tax included. Shipping calculated at checkout
Drill-Kit GTS Allstar – Details
What will be delivered
1 x Auger Drill Bit ø 36 mm (incl. plastic protective cover)
1 x Forstner-Bit ø 74 mm (incl. Allen key)
Technische Daten
Assembly & Video – GTS Allstar 2.0
- Auger drill bit Ø 36 mm: 20 cm (7.9 in) deep (clearance already included)
- Forstner pin combo Ø 74 mm: 8.0 cm deep (at deepest point)
After pre-drilling, insert the GTS into the drill hole and turn it firmly into the tree. The rear surface of the cylinder of the GTS Allstar MUST be firmly against the drill hole!
Shipping & Delivery
Tips for installing GTS tree bolts
The right cordless screwdriver
To pre-drill the large holes for the GTS in the tree, you will need a powerful cordless screwdriver:
✔ A long additional handle is essential!
✔ Drill chuck Ø 11 mm required
✔ Power for softwood: > 80 Nm, 4Ah, 18V
✔ Power for hardwood: > 120 Nm, 4Ah, 22V
Tips for pre-drilling
✔ Drill at low speed (gear 1 or 2) to give the drill bit more power.
✔ Be sure to use an extra handle for more control and safety.
❌ Do not use smaller drill bits for pre-drilling, as this will prevent the self-tapping tip of the auger drill bit from working!
Safety during installation
⚠️ Caution: Risk of injury to the wrist due to sudden kickback!
✔ Only drill with an extra handle
✔ Always ensure you have a firm footing
✔ Secure yourself to the tree
✔ Make sure that no one is standing below you
This is how the professionals build!
