GTS Top – Tree bolt up to 2,100 kg load

Tree Bolt designed to minimise damage to trees, with high Load Capacity for thin trees

✔ For high vertical loads in slender trees
✔ Tree-friendly & safe
✔ Perfect for trunk diameters of 30 cm (11,8 in) to 35 cm (13,8 in)
✔ Improved in 2026: Hex Nut and washer supplied separately! 

Innovative Tree Thread 2.0 for even easier installation!


Sale price2.850,00 kr

Net prices. Additional import & customs charges may apply to the customer. Shipping calculated at checkout

versjon: NY 2.0
In stock – ready for dispatch in 5-10 days
Made in Germany
10-year warranty
30-day return

GTS Top 2.0 – Product Details

Tree Screw (aka. Treehouse Attachment Bolt TAB, Garnier Limb, Tree Fastener)

Big dreams – small trees

For trees with thin trunks (Ø 30–35 cm), where the larger GTS Allstar would destroy too much tissue, there is now an ingenious solution: GTS Top.


It is as tree-friendly as the smaller GTS Friend, but thanks to its robust bearing plate, it has a significantly higher load capacity: in hardwood (e.g. beech), the screw can bear up to 2,100 kg vertically. In softwood (e.g. spruce), the load capacity is significantly lower at around 900 kg.

Please note: The GTS Top is primarily optimised for vertical loads and should not be subjected to heavy lateral loads, especially in softwood.

Height offset for thin trees

The drill hole for the GTS Top is 17 cm deep. To prevent two opposite screws from touching in the middle, the screws must be mounted with a height offset of 10 - 20 cm on thin trees (ø < 40 cm).

Limit lever arm

Especially in soft woods (spruce, fir, pine, poplar, etc.) and with high loads, it is important to keep the lever arm as short as possible. With Position-Rings, you can limit the play.

The right screw for every tree

Our GTS Treehouse Hardware is used not only by DIY enthusiasts, but also by numerous treehouse professionals worldwide. We know what matters!

Example with accessories

Here, the GTS Top had to be additionally reinforced from below: The load is high and the wood is rather soft (pine). To maximise the load capacity of the connection, the Beam Bracket is pushed very close to the tree (low lever arm).

Tri-Beam Bracket – Vario 60 Sale price2.513,00 kr
GTS+ BackUp System Sale price2.670,00 kr
Position Ring Sale price289,00 kr
GTS Top – Tree bolt up to 2,100 kg load Sale priceFrom 2.453,00 kr