CABLE SUSPENSION

BackUp from Above

With the Cable Suspension, your GTS is secured from above with a steel rope – so you can almost double the load capacity!

149,00 

incl. VAT plus shipping

In stock

In stock

✓ Made in Germany ✓ 5 Years Warranty ✓ 30 Days Return

Big dreams or soft trees

When does the GTS Tree Screw need to be reinforced? When the screw reaches its load limit. This can either be because you are building a very large and heavy treehouse. It can also be that you want to strengthen the GTS because your tree is very soft (poplar, willow, spruce, redwood, ...). Or you may decide to enlarge your treehouse after a few years. However, similar to the Strut GTS + from below, you can almost double the load-bearing capacity of your GTS Bolts with the Cable Suspension! Of course, you can also combine both methods if necessary.

</p>
<p>Tree Screws secured from above and reinforced with rope suspension</p>
<p>

More Load Capacity

More Safety
With the Cable Suspension, the load-bearing capacity of our large Tree Screws (Allstar, Top, Friend) can be almost doubled. Which system you choose, the cable suspension from above or the Strut GTS + from below, is irrelevant from a static point of view.

Easy assembly

Mount afterwards
An advantage of the Cable Suspension compared to the reinforcement with Strut GTS + from below is the easy assembly and adjustment from the platform. The cable is anchored about 130 cm to the side above the GTS. Of course, it can also be shortened or lengthened, so you have plenty of leeway when choosing the attachment point. Click here for Assembly Instructions.

2 Grooves for a Hallelujah

The Extension
The Cable Extension is screwed onto the GTS instead of the M30 nut. The robust ø 8 mm cable can thus be attached further out so that the wooden beam can move freely without the cable and beam rubbing against each other. A second groove enables an additional rope stop and facilitates replacement.

What is delivered?

 1 × Cable Suspension Set:

    • GTS Safety (incl. nut M30)
    • Steel cable ø 8 mm + turnbuckle M14 (lges = 130 cm = 50 in)
    • Cable Extension (extension instead of nut M30)
    • Steel cable and turnbuckle are pre-assembled ready for use!
Product Details
  • The rope extension sleeve is mounted instead of the M30 nut.
  • Due to the far outward offset of the rope suspension, the rope runs past the beam unhindered – the wooden beam retains its full freedom of movement!
  • The groove holds the rope in position.
  • The second groove makes it easy to replace or extend the ropes. In this way, two ropes can also be mounted at the same time!
  • The set can be retrofitted at any time!

 

Compatible with / for amplifying:

Technical Data
  • Turnbuckle M14; DIN1480 (Ö/Ö)
  • Steel rope ø 8 mm (EN12385-4 ; 6×19+FC)
  • Ltotal = 130 cm (from end to end)
  • Internal thread M30 (as for nut M30)
  • Total weight of set: 4330 g
  • Article-No.: TTS2006
  • HS code (customs): 73089098
Assembly
  1. Unscrew the M30 nut from the GTS and attach the cable extension.
  2. Open the turnbuckle almost completely (rope as long as possible).
  3. Find the desired point for the cable holder where the GTS Safety is to be screwed in. This is best done slightly to the side, as this activates more wood fibres (possibly on the side where GTS needs more support).
  4. Pre-drill a 145 mm deep hole with a 24 mm Auger-Bitperpendicular to the course of the rope!
  5. Screw in the GTS Safety with a 1′ Ratchet.
  6. Tighten the turnbuckle firmly – done!

Installation Instructions

PDF Download

Assembly Video

YouTube Tutorial

N

Shipping Service

Delivery times, prices, returns

s

Hardware Info

Please read!

Frequently Asked Questions

When do I use Cable Suspension and when Strut GTS +?

Both systems are based on the GTS Safety as an anchor bolt and reinforce the GTS to the same extent. The rope suspension can be easily mounted from the platform and retightened from above. No additional steel parts are visible underneath the treehouse, but the rope guide above the platform can be disturbing, e.g. if there is a walkway or a wall there.

In some cases the tree dictates the type of securing anyway, e.g. no rope can be attached at the top because a large branch is in the way.

Triangular construction – Which GTS do I reinforce?

In a vertically loaded triangular construction, from a static point of view it is usually irrelevant whether the upper or the lower GTS is strengthened, because ideally it is an inherently stiff construction.

However, if the upper cross beam is heavily loaded and bends, a large part of the load is transferred to the lower GTS via the struts. In the case of 3D triangles, the lower GTS also tends to be loaded more by the struts, but this is also pressed into the tree and is therefore already more load-bearing.

The upper GTS, on the other hand, is sometimes loaded with leverage in tension – here a Cable Suspension would make more sense, as it wants to keep the screw in the tree, whereas the Strut GTS + tends to be in the tipping point.

As you can see, you can’t generalise. The best thing to do is to draw a sketch with your platform, the Tree Screws and the prevailing load. Draw force arrows indicating which GTS is loaded where and choose a suitable reinforcement accordingly.

Can I attach several reinforcements to one GTS?

Of course you can also reinforce your GTS (Allstar, Top or Friend) with several ropes and 2 Strut GTS +.

However, it often makes more sense to relieve the load on a Tree Screw by specifically supporting the adjacent parts of the platform with struts (Strut Support Safety or Strut Support GTS) or by using a free rope suspension (GTS Safety or Tree Loop around branch) from above.

TREEHOUSE SCREWS

SCREW ACCESSORIES

Treehouse Assembly Kits

TREEHOUSE ASSEMBLY KITS

TOOLS

SALE

Treehouse Soft Goods - Clothes, Books, Goodies

SOFT GOODS

GERMAN TREEHOUSE SCREW

OUR PRODUCT GUIDE

ATTACHMENT METHODS

SUPPORTING ELEMENTS

what does a platform construction look like treehouse shop

PLATFORM CONSTRUCTIONS

TREEHOUSE DESIGN

Wie groß kann mein Baumhaus werden Gewicht Größe Bau Dimensionen treehouse shop

HOW BIG CAN IT GET?

Brauche ich eine Genehmigung für meinen Baumhaus Bau

BUILDING LAW & PERMIT

TREEHOUSE COSTS

what does a platform construction look like treehouse shop

WHICH TREE IS BEST?

what does a platform construction look like treehouse shop

DO SCREWS HARM THE TREE?

100% MADE IN GERMANY

WE ARE: THE TREEHOUSE SHOP

Treehouse Customer Self Build DIY

WHAT OUR CUSTOMERS SAY

Treehouse Blog

BLOG

WE WILL BUILD YOUR TREEHOUSE!

INSTALLATION INSTRUCTIONS

FAQ

Hi treehouse friends!

We will be happy to help you! Please check our FAQ section first – there, we have already answered the most common questions for you.

In order to be able to advise you optimally, we need:

  • Sketches (drawn by hand is OK)
  • Position and height of the platform
  • Position and size of the treehouse
  • Photos of the trees
  • Tree diameter ø at the height of the platform
  • Tree species
  • Distance between trees (if more than one)
  • Use of the treehouse (many people, public, …)
  • Particularly stormy or snowy region?

 

“Since I often hang in trees or work with loud machines, it's best to contact me via email. The more concrete your idea and the more detailed the description, the better I can help you – thank you!”

Vitus Wahlländer - Owner of TheTreehouse.Shop

+49 17623339648

www.thetreehouse.shop

Dürnbachstraße 16a, 83727 Schliersee, Germany

Kontaktiere uns!

Gerne helfen wir Dir weiter. Bitte check vorher unseren FAQ-Bereich, dort haben wir die gängigsten Fragen bereits beantwortet.

Um Dich optimal beraten zu können, benötigen wir:

  • Skizzen (gerne von Hand gekritzelt)
  • Lage und Höhe der Plattform
  • Position und Größe des Baumhauses
  • Fotos von den Bäumen
  • Baumdurchmesser ø auf Höhe der Plattform
  • Baumart
  • Abstand der Bäume (falls mehrere)
  • Nutzen vom Baumhaus (viele Personen, öffentlich, …)
  • Besonders Sturm oder Schneereiche Region?

 

„Da ich oft in den Bäumen hänge oder mit lauten Maschinen arbeite, kontaktiere mich am besten via E-Mail. Je konkreter Deine Idee und je detaillierter die Beschreibung, desto besser kann ich Dir weiterhelfen – Danke!“

 

Vitus Wahlländer – Chef 

+49 17623339648

www.thetreehouse.shop

Dürnbachstraße 16a, 83727 Schliersee, Deutschland

0
    0
    Warenkorb
    Der Warenkorb ist leer.Zurück zum Shop